BRAKE PADS SOLD PER CALIPER MANY FRONT APPLICATIONS WILL REQUIRE QTY 2

Original BMW brake pads made of sinter for your motorcycle. In the case of very high-quality brake linings, which are subjected to a high pressure, the lining is usually sintered. This is a special manufacturing process in which up to 15 different powdery metals are compacted under heat and pressure. As a result, the starting materials compress so much that they bond with one another and have an extremely high strength.

In contrast to glued pavers of organic pads, the pads of sintered pavers fuses with the carrier plate due to the high temperatures (up to 1000 Celsius) during the production, and is thus almost inseparably connected to it.

For the motorcyclist, sintered metal brake pads offer many decisive advantages:

• Constant high coefficient of friction – no matter at which temperatures
• Extremely temperature resistant
• Non-combustible brake lining wear
• Longer service life compared to organic coatings
• Minimized wear of the brake discs

Replace regularly the linings to ensure driving safety. Brake pads wears relatively quickly and should always be regularly checked and replaced. In which intervals you should change the brake pads at the latest, you can find out either from your BMW dealer or from the manual of the motorcycle.